.308 Win and 6.5 Creedmoor bullet drop tables
.308 Win 168gr:62.0 in at 500 yd; 413.0 in at 1000 yd.
6.5 Creedmoor 140gr ELD-M:180.7 in at 800 yd; 325.6 in at 1000 yd.
Drop is below line of sight with a 100 yd zero. Values are engine predictions for the fixed inputs below.
.308 Win 168gr Federal Gold Medal Match (G1 BC 0.475)
| Range (yd) | Drop (in) | Drop (MOA) | Drop (MIL) | Velocity (fps) | Energy (ft-lbf) |
|---|---|---|---|---|---|
| 100 | 0.0 | 0.00 | 0.00 | 2462 | 2261 |
| 200 | -4.2 | -2.03 | -0.59 | 2282 | 1941 |
| 300 | -15.2 | -4.83 | -1.41 | 2109 | 1658 |
| 400 | -34.0 | -8.11 | -2.36 | 1944 | 1409 |
| 500 | -62.0 | -11.83 | -3.44 | 1787 | 1191 |
| 600 | -100.9 | -16.05 | -4.67 | 1639 | 1002 |
| 700 | -152.7 | -20.84 | -6.06 | 1503 | 842 |
| 800 | -220.0 | -26.27 | -7.64 | 1378 | 709 |
| 1000 | -413.0 | -39.43 | -11.47 | 1175 | 515 |
Negative drop and angular values mean below the line of sight; dial or hold up by their magnitude.
6.5 Creedmoor 140gr Hornady ELD-M (G7 BC 0.315)
| Range (yd) | Drop (in) | Drop (MOA) | Drop (MIL) | Velocity (fps) | Energy (ft-lbf) |
|---|---|---|---|---|---|
| 100 | 0.0 | 0.00 | 0.00 | 2565 | 2045 |
| 200 | -3.8 | -1.81 | -0.53 | 2424 | 1826 |
| 300 | -13.5 | -4.30 | -1.25 | 2288 | 1626 |
| 400 | -29.9 | -7.13 | -2.07 | 2156 | 1444 |
| 500 | -53.7 | -10.26 | -2.98 | 2029 | 1279 |
| 600 | -86.0 | -13.69 | -3.98 | 1906 | 1129 |
| 700 | -127.9 | -17.45 | -5.08 | 1786 | 992 |
| 800 | -180.7 | -21.57 | -6.27 | 1670 | 867 |
| 1000 | -325.6 | -31.10 | -9.05 | 1449 | 652 |
Negative drop and angular values mean below the line of sight; dial or hold up by their magnitude.
How to read this bullet drop table
- Match your load, muzzle velocity, BC, zero, sight height and atmosphere to the listed inputs.
- Find the row for your target range. Drop is the vertical distance below the line of sight.
- Use the magnitude of Drop (MOA) or Drop (MIL) as an up correction in your scope's unit.
- Run your actual conditions and verify the solution on target before using a dope card.
What changes the answer?
Temperature, pressure, humidity, altitude, muzzle velocity, sight height and zero all change the table. The .308 bullet is transonic before 1000 yards, where fixed-BC predictions become less dependable. These are reference values, not a substitute for measured data.
Run your load under your conditions →
Frequently asked questions
- How much does .308 drop at 500 yards?
- Federal Gold Medal Match 168gr .308 Win drops 62.0 inches below the line of sight at 500 yards with a 100-yard zero, G1 BC 0.475, 2650 fps muzzle velocity and the standard conditions below.
- How much does .308 drop at 1000 yards?
- The same .308 reference load drops 413.0 inches at 1000 yards. Its bullet enters the transonic region before this distance, so confirm the result with your measured velocity and field data.
- How much does 6.5 Creedmoor drop at 1000 yards?
- Hornady Match 140gr ELD-M 6.5 Creedmoor drops 325.6 inches at 1000 yards with a 100-yard zero, G7 BC 0.315, 2710 fps muzzle velocity and the standard conditions below.
- What is a bullet drop compensator?
- A bullet drop compensator (BDC) is a reticle or turret with distance marks for a particular trajectory. Its marks are only approximate when your load, muzzle velocity, zero or atmosphere differs from the calibration load.
Calculation and sources
Every table cell is calculated at build time by the WeaponTester trajectory engine using the inputs above. The G1 and G7 drag models were checked against an independent point-mass ballistic solver with matching standard conditions. JBM Ballistics retired its web trajectory calculator, so a direct JBM printout for these two fixed-BC scenarios is unavailable. JBM remains a source for the standard drag references; the independent solver is the numerical cross-check accepted for this article.
The fixed comparison BCs in this table are not current manufacturer specifications: Federal lists G1 0.462 for GM308M, while Hornady lists velocity-banded G7 values for its 140gr ELD Match bullet (0.326 / 0.320 / 0.310). Use the manufacturer's current values when configuring your own load.