How to test a rifle build
Build a bolt-action rifle from the catalog, choose a factory load, and test its trajectory against a steel target. The range solves drop, wind drift and angular corrections for the conditions you set. This walkthrough uses the controls you will see on screen.
Choose parts and a load
In the Builder, choose .308 Win or 6.5 Creedmoor in the caliber row. Work across the Action, Barrel, Stock, Optic and Ammo tabs. The tab strip scrolls sideways on a phone. Select one option in each required tab; Suppressor is optional.
For the example below, choose .308 Win and the Federal Gold Medal Match 175 gr SMK factory load in Ammo. The builder uses the selected barrel length to estimate muzzle velocity when it differs from the load's published test barrel. Once the required slots are filled, select Test on the Range → in the build summary.
Set one test distance
On the Range, choose Practice. Under Conditions, move Target distance to 500 yd, set Zero range to 100 yd, and choose a Wind speed. Wind direction at 90° is a full-value wind from right to left. Open Atmosphere ▾ to change temperature, station pressure, humidity or altitude.
The range immediately recalculates as you move a control. Start with zero wind to isolate elevation, then add wind to see its separate effect. Keep the same zero and atmosphere when comparing loads; otherwise the comparison mixes input changes.
Turn drop into a scope correction
Trajectory · Drop vs Range plots the path, while the range's dope table lists the angular elevation and wind corrections. Scope Dial lets you enter elevation and windage in your chosen optic's turret unit. A MIL reticle with MOA turrets still requires you to dial in MOA. MOA and MIL are angles, so the inches of drop alone are not a turret setting.
The reference numbers below use the load's published muzzle velocity, 100 yd zero, 1.5 in sight height and ICAO sea-level air. A builder-selected barrel can produce a different estimate, so treat the chart as a reference and the live range as your build's result.
Swipe the table to see the wind column →
| Range | Drop | Elev. | 10 mph wind |
|---|---|---|---|
| 300 yd | -15.7 in | 1.5 MIL | 0.7 MIL |
| 500 yd | -63.7 in | 3.5 MIL | 1.2 MIL |
| 800 yd | -224.4 in | 7.8 MIL | 2.2 MIL |
Wind column: 10 mph at 90°, with spin drift separated. Open the full chart for MOA, velocity, energy, 200 yd zero and every 50 yd interval.
Keep a usable record
In the range's Drop Table, select Dope card to open this build and its conditions in a new tab. There, use Print, PNG or Copy link to keep the result. If you only need published reference data, start from the factory drop charts; if you want to compare elevation capacity before choosing an optic, use the scope comparison.