Athlon Ares ETR 4.5-30x56 FFP
On a 20 MOA base the Athlon Ares ETR 4.5-30x56 FFP has about 21.8 MIL of elevation above a 100 yd zero. That dials Hornady Match 140gr ELD-M (6.5 Creedmoor) to 1000 yd with 12.9 MIL to spare and Federal Gold Medal Match 175gr SMK (.308 Winchester) to 1000 yd with 10.1 MIL to spare.
- Magnification
- 4.5–30×
- Objective
- 56mm
- Tube
- 34mm
- Focal plane
- FFP
- Click
- 0.1MIL
- Total elevation
- 32.0MIL
- Up, 20 MOA base
- 21.8MIL
- Weight
- 36.7oz
Reticle: APRS6 FFP MIL. Specs from Athlon. First focal plane, 34mm tube, illuminated reticle. Locking turrets with zero-stop.
Reach calculator
Pick a factory load, a zero and a base. The turret check runs against the same drop table published for that load.
Still has elevation left at 1000 yd.
- Above zero
- 21.8 MIL
- Down travel left at zero
- 10.2 MIL
- 600 ydneeds 3.9 MIL · 17.9 MIL spare
- 800 ydneeds 6.2 MIL · 15.6 MIL spare
- 1000 ydneeds 8.9 MIL · 12.9 MIL spare
Bar = share of the dialable elevation that range uses. Required elevation is the drop-chart solution at ICAO sea level with a 1.5 in sight height; available elevation assumes the scope zeroes at the middle of its 32.0 MIL travel plus the base cant.
Reach and spare elevation, every load
With a 100 yd zero. A range (“850 yd”) is the farthest 50 yd step the Ares ETR 4.5-30x56 FFP can dial before the turret tops out. A signed value (“+4.2 MIL”) means it reaches 1000 yd with that much elevation left over. “—” means the scope can't zero on that base.
| Load | 0 MOA base | 20 MOA base | 30 MOA base |
|---|---|---|---|
| .308 Winchester | |||
| Hornady Match 168gr ELD-M | +5.7 MIL | +11.5 MIL | +14.5 MIL |
| Hornady Match 178gr ELD-M | +5.1 MIL | +10.9 MIL | +13.8 MIL |
| Federal Gold Medal Match 168gr SMK | +3.7 MIL | +9.5 MIL | +12.4 MIL |
| Federal Gold Medal Match 175gr SMK | +4.3 MIL | +10.1 MIL | +13.0 MIL |
| Berger Match 185gr Juggernaut OTM | +5.4 MIL | +11.2 MIL | +14.1 MIL |
| 6.5 Creedmoor | |||
| Hornady Match 140gr ELD-M | +7.1 MIL | +12.9 MIL | +15.9 MIL |
| Hornady Precision Hunter 143gr ELD-X | +6.9 MIL | +12.7 MIL | +15.6 MIL |
| Federal Gold Medal Match 140gr Sierra MatchKing | +5.4 MIL | +11.3 MIL | +14.2 MIL |
| Federal Gold Medal Berger 130gr Hybrid OTM | +7.7 MIL | +13.5 MIL | +16.4 MIL |
| Berger Match 140gr Hybrid Target | +7.2 MIL | +13.0 MIL | +15.9 MIL |
| Berger Match 153.5gr Long Range Hybrid Target | +7.4 MIL | +13.3 MIL | +16.2 MIL |
How the check works
A scope zeroed near the middle of its travel has about half its total elevation left above zero. A canted base tilts the scope down by its cant, so that much more of the travel sits above zero. The catch: the scope still needs that much down travel to reach zero in the first place.
Ring height, receiver tolerances and where the erector sits from the factory move the real mechanical center by a few MOA either way. If a range is within about 1.5 MIL of the limit, treat it as marginal and check your own rifle: count the clicks from zero to the top stop.
What it leaves out
Elevation needed comes from factory muzzle velocity in the maker's test barrel. A shorter barrel, cold air or a low-pressure day each changes it, and holding over in a FFP reticle can add reach the turret doesn't have. FFP vs SFP holds.
The 200 yd zero option in the calculator lowers the elevation you need at distance by the difference between the two zeros. 100 vs 200 yd zero.
Mount the Ares ETR 4.5-30x56 FFP on a bolt-action build, set your barrel, altitude and wind, and read the dial on the range.
Questions
Will the Athlon Ares ETR 4.5-30x56 FFP reach 1000 yards?
On a 20 MOA base the Athlon Ares ETR 4.5-30x56 FFP has about 21.8 MIL of elevation above a 100 yd zero. That dials Hornady Match 140gr ELD-M (6.5 Creedmoor) to 1000 yd with 12.9 MIL to spare and Federal Gold Medal Match 175gr SMK (.308 Winchester) to 1000 yd with 10.1 MIL to spare. On a flat (0 MOA) base it has 16.0 MIL above zero, which clears 1000 yd with Hornady Match 140gr ELD-M (7.1 MIL left) and clears 1000 yd with Federal Gold Medal Match 175gr SMK (4.3 MIL left). All figures assume a 100 yd zero, a 1.5 in sight height and ICAO sea-level air.
How much elevation adjustment does the Athlon Ares ETR 4.5-30x56 FFP have?
Athlon lists 32.0 MIL of total elevation travel (110 MOA) in 0.1 MIL clicks. Zeroed at the middle of its range, roughly half of that, 16.0 MIL, is available above zero on a flat base.
Should I use a 20 MOA base with the Athlon Ares ETR 4.5-30x56 FFP?
A 20 MOA base adds 20 MOA of usable up-travel and still leaves 10.2 MIL of down travel to reach a 100 yd zero. A 30 MOA base leaves 7.3 MIL, so check that against your rings before you buy one.